Canon iPF760 - Resizing Originals by Entering a Scaling Value (Mac os X)

Resizing Originals by Entering a Scaling Value (Mac OS X)
Resizing Originals by Entering a Scaling Value (Mac OS X)
This topic describes how to enlarge originals before printing by entering a scaling value, based on the following
example.
• Document: Any Type
• Page size: A4 (210.0 × 297.0 mm [8.3 × 11.7 in])
• Paper: Roll paper
• Paper type: Plain Paper
• Roll paper width: A2/A3 roll (420.0 mm [16.5 in])
1 This sets the B Format for and C Paper Size.
Note
•
The configuration method varies depending on the OS
and application software you are using.
If Page Setup is displayed in the application menu, the
settings are configured by opening the Page Attributes
dialog box from Page Setup.
If it is not displayed, the settings are configured in the
upper part of the printer driver displayed when you se-
lect Print from the application software menu.
2 Select the printer in the A Printer list.
3 In the F Paper Size list, click the size of the original. In this case, click ISO A4.
4 If you configured the settings using the Page Attributes dialog box, click FOK to close the dialog box, and
then select Print from the application software menu.
5
Access the Main pane.
6 In the A Media Type list, select the type of paper that is loaded. In this case, click Plain Paper.
7 Make your selection in the E Print Target list.
iPF760 Resizing Originals by Entering a Scaling Value (Mac OS X)
User's Guide
Enhanced Printing Options Printing enlargements or reductions
73