5
Select the printing application in the EPrint Target list.
6
Click the Page Setup tab to display the Page Setup
sheet.
7
Select and click a roll paper in the L Paper Source list.
8
Select the width of the loaded roll in the M Roll Paper Width list—in this case, ISO A2/A3 Roll
(420.0mm).
9
In the A Page Size list, click the size of the original as specified in the application. In this case, click ISO
A4.
10
Select the C Enlarged/Reduced Printing check box.
11
Click ISO A4 in the G Paper Size list.
12
Click F Scaling and enter 120.
Note
• You can specify enlargement that exceeds the paper size, but in this case, the portions off the bottom and right
edges of the paper will not be printed.
•
If the original size after enlargement or reduction is
smaller than the paper size, the original is printed in the
upper-left corner. In this case, you can center originals
by selecting
E Print Centered on the Layout sheet.
13
Confirm the print settings and print as desired.
Note
• For tips on confirming print settings, see "Confirming Print Settings(Windows) →P.161 "
Resizing Originals by Entering a Scaling Value (Windows)
iPF760
User's Guide
Enhanced Printing Options Printing enlargements or reductions
72
To Next Page
Loading...
