Canon iPF760 - Paper Is Crooked; Paper Not Aligned with Right Guide; Cannot Detect Papr

"Manually rewind the roll all the way and press OK."
Cause Corrective Action
A paper jam occurred
when advancing the
paper.
1. Rewind paper on the Roll Holder manually, all the way, and then press the OK button.
2. Load the paper.
3. If "Not finished printing. Finish printing remaining jobs?" is shown on the Display Screen, press the OK
button.
Printing will resume, starting from the page on which the error occurred.
(See "Loading Rolls in the Printer.") →P.399
Paper is crooked.
Paper is crooked.
Cause Corrective Action
Paper loaded crooked was detected when the paper was advanced. Follow these steps to reload the roll.
1. Push the Release Lever back.
2. Adjust the right edge of the roll to make it parallel to the orange
Paper Alignment Line.
3. Pull the Release Lever forward.
(See "Loading Rolls in the Printer.")
→P.399
If this error recurs after you reload the roll, remove the Roll Holder
from the printer, push the roll firmly in until it touches the Roll Holder
flange, and reload the Roll Holder in the printer.
(See "Attaching the Roll Holder to Rolls.") →P.397
Follow these step to reload a sheet.
1. Push the Release Lever back.
2. Pull out the sheet.
3. Pull the Release Lever forward.
4. Reload the sheet, aligning it with the guide on the right.
(See "Loading Sheets in the Printer.")
→P.417
Important
• To disable this message (if it is displayed repeatedly despite reloading paper, for example), choose Off or Loose in the
Skew Check Lv. setting of the printer menu. However, this may cause jams and printing problems because paper may
be askew when printed. Also, the Platen may become soiled, which may soil the back of the next document when it is
printed.
Paper not aligned with right guide.
Paper not aligned with right guide.
Cause Corrective Action
When paper was loaded, it was not aligned with the guide on the right side. Follow these step to reload a sheet.
1. Push the Release Lever back.
2. Pull out the sheet.
3. Pull the Release Lever forward.
4. Reload the sheet, aligning it with the guide on the right.
Cannot detect papr
Cannot detect papr
Cause Corrective Action
The paper has come out of the printer. Follow these step to reload a sheet.
1. Remove the paper and press the OK button.
2. Reload the sheet, aligning it with the guide on the right.
(See "Loading Sheets in the Printer.") →P.417
iPF760 Paper is crooked.
User's Guide
Error Message Messages regarding paper
585