Canon iPF760 - Messages Regarding Ink; Ink Insufficient; No Ink Left; Remaining Level of the Ink Cannot be Correctly Detected

Messages regarding ink
Messages regarding ink
Ink insufficient. ............................................................................................................................................. 588
No ink left. .................................................................................................................................................... 588
Remaining level of the ink cannot be correctly detected. ............................................................................ 588
Unable to detect ink level correctly. ............................................................................................................. 588
Close Ink Tank Cover ................................................................................................................................... 588
Ink tank is empty. ......................................................................................................................................... 589
Not much ink is left. ...................................................................................................................................... 589
No ink tank loaded. ...................................................................................................................................... 589
Wrong ink tank. ............................................................................................................................................ 589
Do not pull out ink tank. ............................................................................................................................... 589
Ink insufficient.
Ink insufficient.
Cause Corrective Action
The ink level is low, so you cannot print, clean the Printhead, or do
other operations that require ink.
Press ▲ or ▼ to select Rep. Ink Tank, and then press the OK but-
ton. Replace the Ink Tank that is low with a new Ink Tank.
(See "Replacing Ink Tanks.") →P.518
Press ▲ or ▼ to select Continue to print, and then press the OK
button to resume printing. However, note that this error may affect
the printing quality.
No ink left.
No ink left.
Cause Corrective Action
There is no ink left. Open the Ink Tank Cover and replace the Ink Tank for which the Ink Lamp is flashing.
(See "Replacing Ink Tanks.")
→P.518
Remaining level of the ink cannot be correctly detected.
Remaining level of the ink cannot be correctly detected.
Cause Corrective Action
Ink level detection cannot work correctly if
you use refill ink tanks.
The refill ink tank can no longer be used. See the section Ink level detection and take the
appropriate action. (See "Ink Level Detection.") →P.573
Unable to detect ink level correctly.
Unable to detect ink level correctly.
Cause Corrective Action
The remaining ink level could not be correctly detected. Close the Ink Tank Cover.
The buzzer will stop once the error is cleared.
Close Ink Tank Cover
Close Ink Tank Cover
Cause Corrective Action
The Ink Tank Cover is open. Close the Ink Tank Cover.
Ink insufficient. iPF760
User's Guide
Error Message Messages regarding ink
588