Canon iPF760 - Other Messages; GARO Wxxxx (X Represents a Number); ERROR Exxx-XXXX (X Represents a Letter or Number); Hardware Error. XXXXXXXX-XXXX (X Represents a Letter or Number)

Other Messages
Other Messages
GARO Wxxxx (x represents a number) ........................................................................................................ 595
ERROR Exxx-xxxx (x represents a letter or number) ................................................................................... 595
Hardware error. xxxxxxxx-xxxx (x represents a letter or number) ............................................................... 595
Top cover is open. ....................................................................................................................................... 595
Prepare for parts replacement. .................................................................................................................... 596
Parts replacement time has passed. ........................................................................................................... 596
Unknown file. ................................................................................................................................................ 596
Multi-sensor error ......................................................................................................................................... 596
Error in cutter position. ................................................................................................................................. 596
GARO Wxxxx (x represents a number)
GARO Wxxxx (x represents a number)
Cause Corrective Action
There is a problem with the print job. Try printing again, using the correct printer driver.
It is also possible to continue printing in this state.
However, you may not be able to obtain the desired printing results.
ERROR Exxx-xxxx (x represents a letter or number)
ERROR Exxx-xxxx (x represents a letter or number)
Cause Corrective Action
An error requiring service may have occurred. Write down the error code and message, turn off the printer, and contact your Canon deal-
er for assistance.
Hardware error. xxxxxxxx-xxxx (x represents a letter or number)
Hardware error. xxxxxxxx-xxxx (x represents a letter or number)
Cause Corrective Action
The last portion of roll paper was used during a print job. The paper
was not advanced because the trailing edge is taped to the roll.
Turn off the printer and remove the roll from the printer before re-
storing power.
Fastening tape or the Belt Stopper has not been removed inside the
Top Cover.
Turn off the printer, open the Top Cover and remove the tape or
the Belt Stopper before restoring power.
An error requiring service may have occurred. Turn off the printer and wait at least three seconds before restor-
ing the power.
If the message is displayed again, write down the error code and
message, turn off the printer, and contact your Canon dealer for
assistance.
Top cover is open.
Top cover is open.
Cause Corrective Action
The printer has detected that the Top Cover is
open.
Open the Top Cover fully, remove any foreign objects, and close the Top Cover again.
If the error occurs again, close the Top Cover, turn off the printer, and wait a while
before restoring power.
iPF760 GARO Wxxxx (x represents a number)
User's Guide
Error Message Other Messages
595