Canon iPF760 - Documents Are Printed in Monochrome; Line Thickness Is Not Uniform; Lines Are Misaligned

Cause Corrective Action
In the Control Panel menu, Width Detection is set to Off. Set Width Detection to On in the Control Panel menu.
Documents are printed in monochrome
Documents are printed in monochrome
Cause Corrective Action
In the Advanced Settings of the printer driver, Mono-
chrome, Monochrome (BK ink), or Monochrome Bit-
map is specified in Color Mode.
In the Advanced Settings of the printer driver, specify Color in Color Mode
and try printing again.
The Printhead nozzles are clogged. Print a test pattern to check the color ink nozzles and see if they are clogged.
(See "Checking for Nozzle Clogging.")
→P.524
Line thickness is not uniform
Line thickness is not uniform
Cause Corrective Action
In the Special Settings dialog box of the
Windows printer driver, Fast Graphic
Process is selected.
Access the printer driver Properties dialog box from Print in the File menu of the source appli-
cation, and follow these steps to print.
1. Clear the option Open Preview When Print Job Starts on the Main sheet.
2. Clear the option Page Layout on the Layout sheet.
3. Click the Special Settings button in the Layout sheet to open the Special Settings dialog
box, and remove the check from Fast Graphic Process.
The type of paper specified in the printer
driver does not match the type loaded in
the printer.
Load paper of the same type as you have specified in the printer driver.
(See "Loading Rolls in the Printer.") →P.399
(See "Loading Sheets in the Printer.") →P.417
Make sure the same type of paper is specified in the printer driver as you have loaded in the
printer.
1. Press the Stop button and stop printing.
2. Change the type of paper in the printer driver and try printing again.
Lines are misaligned
Lines are misaligned
Cause Corrective Action
The Printhead alignment is not adjus-
ted.
Adjust the Printhead alignment.
(See "Automatic Adjustment to Straighten Lines and Colors (Head Posi. Adj.).") →P.502
(See "Manual Adjustment to Straighten Lines and Colors (Head Posi. Adj.).") →P.503
(See "Adjusting Line Misalignment (Head Inc. Adj.).") →P.505
The type of paper specified in the print-
er driver does not match the type loa-
ded in the printer.
Load paper of the same type as you have specified in the printer driver.
(See "Loading Rolls in the Printer.") →P.399
(See "Loading Sheets in the Printer.") →P.417
Make sure the same type of paper is specified in the printer driver as you have loaded in the
printer.
1. Press the Stop button and stop printing.
2. Change the type of paper in the printer driver and try printing again.
iPF760 Documents are printed in monochrome
User's Guide
Troubleshooting Problems with the printing quality
565