Item Details Default Setting
DNS Domain Name Specify the printer domain name, up to 63 characters. Use sin-
gle-byte letters, numbers, - (hyphens), and . (periods). Do not
use numbers, -, or . for the first character, or - or . for the last
character.
blank
Perform dynamic updating of stateful
addresses
Activate this setting to automatically register the stateful address
with the DNS server.
Off
Dynamically update the stateless ad-
dress
Activate this setting to automatically register the stateless ad-
dress with the DNS server.
Off
Dynamically update the manual ad-
dress
Activate this setting to automatically register the manual address
with the DNS server.
Off
7
Click OK to display the Network page.
Note
• If you are using a DNS server, select Enable DNS Dynamic Update and enter the IP Address for DNS servers and DNS
domain name in Primary DNS Server Address, Secondary DNS Server Address and DNS Domain Name, respective-
ly.
iPF760
Configuring the Printer's TCP/IP Network Settings With RemoteUI
User's Guide
Network Setting Initial Settings
483