CAPINTEC, INC. CAPTUS
®
600
Note: Selection 0 will display “RETURN TO WELL SCREEN” if the Utilities menu is
accessed from the Well main screen.
Press 3 to select SETUP. The message “PASSWORD:” will appear. Type the last three digits
of your CAPTUS
®
600 serial number, and press the ENTER key. The Setup menu (Figure 7-
2
) will appear.
1. Ci/Bq
2. TEST DAT
3. THYROID UPTAKE
4. BIO ASSAY
6. ACTIVITY CONVERSION FACTORS
SETUP
5. AUTO CALIBRATION
7. WIPE AND MCA SETUP
8. OTHE
0. RETURN TO UTILITIES MENU
14:32
Figure 7-2
Press 3 to select THYROID UPTAKE. The Thyroid Uptake Setup menu (
Figure 7-3) will
appear:
1. COUNTING
2. PROTOCOLS
0. RETURN TO SETUP MENU
14:32
THYROID UPTAKE SETUP
3. PRINT ALL
Figure 7-3
Press 1 to select COUNTING.
Figure 7-4 will appear.
Note: If there are active Thyroid Patients or an active standard, a message will appear
informing you that Counting Method cannot be changed. This is to avoid changing
counting methods in the middle of a study and getting erroneous results. If you want
to see the current values, press 3 to print all the Protocols and the current Counting
Methods.
7-2 THYROID UPTAKE SETUP November 07
To Next Page
Loading...
