CAPINTEC, INC. CRC
-25R
9 - 2 DIAGNOSTICS April 12
Note: The value displayed after PASS is for example only and is not a real value. The value
displayed will depend upon the current revision of the installed software.
Press any key (except HOME) to continue. Figure 9-1 Main Menu will re-appear.
If the Diagnostics test fa
ils, Figure 9-3 Diagnostics Screen if fails will appear.
DIAGNOSTICS
SYSTEM TEST
FAIL: fc10
Any Key to Continue
Figure 9-3 Diagnostics Screen if fails
Note: The value displayed after FAIL is for example only and is not a real value.
At power-up, the CRC
®
-25R’s program is copied from the SD card into RAM memory. If the
System Test fails, restart the unit and perform the test again. If it fails again, contact
Capintec’s only
Authorized Service Center (reference CHAPTER 15: CLEANING AND
MAINTENANCE, SECTION: SERVICING) for more information, since this will indicate a SD
card error or a system malfunction
Press any key (except HOME) to continue. Figure 9-1 Main Menu will re-appear.
To Next Page
Loading...
Need help?
General