Capintec CRC-25R - Page 40

CAPINTEC, INC. CRC
®
-25R
Apr 04 2006
09:56
Correct ?
Yes or No
Figure 5-3 Date / Time Verification Screen
If the date and time are correct, press YES. Figure 5-2 Main Setup Menu will re-appear.
If the date and/or time are incorrect, press NO to make necessary changes. Figure 5-4 Date
Entry Screen will appear.
Enter Date
_
MMDDYYYY
Figure 5-4 Date Entry Screen
Input the date in the form MMDDYYYY (example: July 3, 2005 would be 07032005) and
press ENTER. The date is checked for validity. If the input date is not valid, a beep will sound
and “DATE ERROR” will be displayed. The date must be re-entered.
Figure 5-5 Time Entry Screen will appear.
Enter Time
_
hhmm
Figure 5-5 Time Entry Screen
Input the time as hhmm in 24-hour time format (example: 1:25 PM would be 1325, 9:15 AM
would be 0915) and press ENTER. The time is checked for validity. If the entered time is not
valid, a beep will sound and “TIME ERROR” will be displayed. The time must be re-entered.
5 - 2 SYSTEM INITIALIZATION March 15