CAPINTEC, INC. CRC
®
-25R
Figure 5-16c Epson LX-300+II Printer Changing Settings Instructions
7. Press the LF/FF button to scroll through the options for the selected setting
until the desired setting is printed. Then press the TEAR OFF (FONT) button
to select the next setting to be changed.
8. When all changes are complete, turn off the printer to exit Default Setting
mode.
The new settings will remain in effect until they are changed again or the printer is
reset to the default settings.
Note: The Setup printout shown in Figure 5-15 Epson LX-300+II Printer Current
Settings is for example only. Your printer Setup may differ slightly from that
shown. Verify that the settings, which are the same between your Setup and
that shown, concur.
March 15 SYSTEM INITIALIZATION 5 - 15
To Next Page
Loading...