2. Using special tool CH-20011 (1) & CH-20012 (2),
install the new valve oil seal.
3. Install the valve springs.
4. Install the valve spring retainers.
5. Using valve spring compressor CH-20018 (1), com-
press the valve springs.
6. Install the valve keepers.
7. Strike the valve stem lightly with a plastic hammer after installation to verify proper assembly.
Valve Springs
Specifications
Valve Spring Specifications
DESCRIPTION SPECIFICATION
Spring Free Length 49 mm
Spring Height At 620 Newtons Of Pressure 32.0 mm
CYLINDER HEAD UNIT REPAIR
LTSM020224
BESM020067
02–76
Chery Automobile Co., Ltd.
To Next Page
Loading...
