Remote Keyless Entry (RKE) Inoperative
No Response From Remote Keyless Entry (RKE) Transmitter
1.
CHECK TRANSMITTER BATTERY
• Check the battery of the RKE transmitter.
Is the battery voltage of the RKE transmitter normal?
Yes
>> Go to the next step.
No
>>
This concern has been caused by the transmitter battery.
Go to step 4.
2.
CHECK THE IGNITION LOCK CYLINDER CONDITION
• Check the ignition lock cylinder for proper operation.
Is the check result normal?
Yes
>> Go to the next step.
No
>> Repair or replace the ignition lock cylinder key switch.
3.
PERFORM THE RKE TRANSMITTER MATCH PROCEDURE
• Close all the doors.
• Insert the ignition key into the ignition switch which has lost synchronization in LOCK position.
• Press any button on the RKE transmitter within 5 seconds.
• Pull the ignition key out of the ignition switch.
• Try to operate the RKE transmitter.
Does the RKE transmitter operate properly?
Yes
>> Erase all codes before returning the vehicle to the customer.
No
>> Go to the next step.
ON-VEHICLE SERVICE
15–150
Chery Automobile Co., Ltd.
To Next Page
Loading...
Need help?
General
