GENERAL INFORMATION
Description
The Automated Manual Transaxle (AMT) control system is located on the transaxle housing. It consists of the fol-
lowing components:
The AMT is based on the traditional manual transaxle. The AMT is equipped with an electro-mechanical, hydraulic
control unit, thus incorporating an automatic five-speed transaxle.
Operation
The AMT electro-mechanical & hydraulic system is controlled by the AMT control module and Engine Control Module
(ECM). The gear position is determined by the gearshift lever.
• Automatic Mode: The AMT control module performs gear changes according to a predetermined vehicle control
strategy.
• Manual Mode: The driver controls the gear changes through the use of the gearshift lever.
1 - Gearshift Mechanism Cover
2 - Return Hose
3 - Electronic Control Valve Unit
4 - Hydraulic Pressure Accumulator
5 - Transaxle Fluid Reservoir
6 - Pressure Pipe
7 - Clutch Cable Control Actuator
PZSM020052
08–50
Chery Automobile Co., Ltd.
To Next Page
