3.
CHECK DTC
• With the X-431 scan tool, read ECM DTCs.
• Refer to 9DTC Confirmation Procedure9.
Is the check result normal?
Yes
>>
The system is now operating properly.
Reassemble the vehicle and road test to verify the customers complaint is repaired.
No
>> Replace the ECM.
NOTE : The Immobilizer control module must be matched to the new ECM (See ECM Removal & Instal-
lation in Section 03 Electronic Engine Controls).
DIAGNOSIS & TESTING
03–150
Chery Automobile Co., Ltd.
To Next Page
Loading...
Need help?
General
