4. Remove the power steering return line bracket
retaining bolts.
5. Remove the power steering return line clamp (1).
6. Loosen the upper nut and remove the retaining bolt
(1) on the return line bracket.
(Tighten: Return line bolt to 20 ± 5 N·m)
7. Remove the return line.
8. Installation is in the reverse order of removal.
Installation Notes:
• Fill the power steering reservoir to the proper level.
• Check the system for leaks.
ON-VEHICLE SERVICE
PZSM110005
PZSM110029
11–46
Chery Automobile Co., Ltd.