6. Reach inside the vehicle and fully apply and release the parking brake.
7. With the parking brake lever in the fully applied (up) position, attempt to rotate the rear rotors by hand (to ensure
that the parking brake shoes are working properly).
8. With the parking brake lever in the released (down) position, attempt to rotate the rear rotors by hand (to ensure
that the parking brake shoes are not dragging).
9. Install both rear tire and wheel assemblies and the wheel mounting nuts.
(Tighten: Wheel mounting nuts to 110 N·m)
10. Lower the vehicle.
DIAGNOSIS & TESTING
12–84
Chery Automobile Co., Ltd.