EasyManuals Logo

Cisco ASR 9000 Series Reference Guide

Cisco ASR 9000 Series
696 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #195 background imageLoading...
Page #195 background image
AIB:0 L2VPN:5 L3FIB:0 VPDN:0
Number of xconnect updates dropped due to:
Invalid XID: 0 VPWS PW, 0 VPLS PW, 0 Virtual-AC, 0 PBB
Exceeded max allowed: 0 VPLS PW, 0 Bundle-AC
Number of p2p xconnects: 1
Number of bridge-port xconnects: 4
Number of nexthops:2
MPLS: Bound:2 Unbound:0 Pending Registration:0
P2MP MLDP: Bound:1 Unbound:0 Pending Registration:0
P2MP TE: Bound:1 Unbound:0 Pending Registration:0
Number of bridge-domains: 2 (0 with routed interface, 2 with P2MP enabled)
Number of bridge-domain updates dropped: 0
Number of static macs: 0
Number of routed macs: 0
Number of locally learned macs: 0
Number of remotely learned macs: 0
Number of total macs: 0
Number of total P2MP Ptree entries: 2
MLDP:1 (LMRIB:1) RSVP-TE:0 (LMRIB:0)
The example shows sample output for the show l2vpn forwarding detail command with PW grouping for
multi-segment PWs.
RP/0/RSP0/CPU0:router# show l2vpn forwarding detail location
Local interface: GigabitEthernet0/0/0/0.100, Xconnect id: 0x100009, Status: up
Segment 1
AC, GigabitEthernet0/0/0/0.100, Ethernet VLAN mode, status: Bound
Statistics:
packets: received 0, sent 0
bytes: received 0, sent 0
Segment 2
MPLS, Destination address: 1.1.1.10, pw-id: 100, status: Bound, Active
Pseudowire label: 16000 Control word disabled
NHOP: 1.1.1.10, PW-Group Id: 0x1001
Backup PW
MPLS, Destination address: 3.3.3.30, pw-id: 300, status: Bound
Pseudowire label: 16000
NHOP: 3.3.3.30, Backup PW-Group Id: 0x1002
Statistics:
packets: received 0, sent 0
bytes: received 0, sent 0
The example shows sample output for the show l2vpn forwarding summary command with PW grouping
for multi-segment PWs.
RP/0/RSP0/CPU0:router# show l2vpn forwarding summary location 0/0/CPU0
Tue Jun 18 22:29:47.815 DST
Major version num:1, minor version num:0
Shared memory timestamp:0x182a49b4f9
Global configuration:
Number of forwarding xconnect entries:31
Up:19 Down:12
AC-PW(atom):0 AC-PW(l2tpv2):0 AC-PW(l2tpv3):0
AC-PW(l2tpv3-ipv6):0
AC-AC:3 AC-BP:16 AC-Unknown:0
PW-BP:12 PW-Unknown:0
PBB-BP:0 PBB-Unknown:0
Monitor-Session-PW:0 Monitor-Session-Unknown:0
Number of xconnects down due to:
AIB:0 L2VPN:12 L3FIB:0 VPDN:0
Number of xconnect updates dropped due to:
Invalid XID: 0 VPWS PW, 0 VPLS PW, 0 Virtual-AC, 0 PBB
Exceeded max allowed: 0 VPLS PW, 0 Bundle-AC
Number of p2p xconnects: 1
Number of PW-Group Ids: 1
Number of PW-Group Ids Down: 0
Number of bridge-port xconnects: 28
Number of nexthops:5
MPLS: Bound:0 Unbound:5 Pending Registration:0
P2MP MLDP: Bound:0 Unbound:0 Pending Registration:0
Cisco ASR 9000 Series Aggregation Services Router VPN and Ethernet Services Command Reference, Release
6.1.x
181
Point to Point Layer 2 Services Commands
show l2vpn forwarding

Table of Contents

Other manuals for Cisco ASR 9000 Series

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Cisco ASR 9000 Series and is the answer not in the manual?

Cisco ASR 9000 Series Specifications

General IconGeneral
SeriesASR 9000
CategoryNetwork Router
Modular DesignYes
RedundancyYes (Hardware and Software)
Operating SystemCisco IOS XR
Interfaces/Ports10G, 40G, 100G, 400G Ethernet
Expansion SlotsVaries by model
Routing ProtocolBGP, OSPF, IS-IS, EIGRP
ManagementCLI, SNMP, NETCONF
Power SupplyRedundant
Port DensityVaries by model
Power Supply OptionsAC, DC
MemoryVaries by model
StorageVaries by model
DimensionsVaries by model
WeightVaries by model

Related product manuals