Cisco Catalyst 3750-X Command Reference

2-988
Catalyst 3750-X and 3560-X Switch Command Reference
OL-29704-01
Chapter 2 Catalyst 3750-X and 3560-X Switch Cisco IOS Commands
vmps reconfirm (privileged EXEC)
vmps reconfirm (privileged EXEC)
Use the vmps reconfirm privileged EXEC command on the switch stack or on a standalone switch to
immediately send VLAN Query Protocol (VQP) queries to reconfirm all dynamic VLAN assignments
with the VLAN Membership Policy Server (VMPS).
vmps reconfirm
Syntax Description This command has no arguments or keywords.
Defaults No default is defined.
Command Modes Privileged EXEC
Command History
Examples This example shows how to immediately send VQP queries to the VMPS:
Switch# vmps reconfirm
You can verify your setting by entering the show vmps privileged EXEC command and examining the
VMPS Action row of the Reconfirmation Status section. The show vmps command shows the result of
the last time the assignments were reconfirmed either because the reconfirmation timer expired or
because the vmps reconfirm command was entered.
Related Commands
Release Modification
12.2(53)SE2 This command was introduced.
Command Description
show vmps Displays VQP and VMPS information.
vmps reconfirm (global
configuration)
Changes the reconfirmation interval for the VQP client.

Cisco Catalyst 3750-X Specifications

General

Switching Capacity	160 Gbps
Stacking Bandwidth	64 Gbps
Max Stacking Units	9
Layer Support	Layer 2 and Layer 3
Form Factor	Rack-mountable
DRAM	256 MB
Flash Memory	64 MB
Model	Cisco Catalyst 3750-X Series
Ports	24 or 48 10/100/1000 Ethernet ports
Uplink Interfaces	4 SFP or 2 SFP+
Features	StackWise Plus, EnergyWise
Image	IP Base or IP Services
Operating Temperature	0 to 40°C
Operating Humidity	10 to 85% noncondensing