Cisco Catalyst 3750-X Command Reference

A-23
Catalyst 3750-X and 3560-X Switch Command Reference
OL-29704-01
Appendix A Catalyst 3750-X and 3560-X Switch Boot Loader Commands
rmdir
rmdir
Use the rmdir boot loader command to remove one or more empty directories from the specified file
system.
rmdir filesystem:/directory-url ...
Syntax Description
Command Modes Boot loader
Command History
Usage Guidelines Directory names are case sensitive and limited to 45 characters between the slashes (/); the name cannot
contain control characters, spaces, deletes, slashes, quotes, semicolons, or colons.
Before removing a directory, you must first delete all the files in the directory.
The switch prompts you for confirmation before deleting each directory.
Examples This example shows how to remove a directory:
switch: rmdir flash:Test
You can verify that the directory was deleted by entering the dir filesystem: boot loader command.
Related Commands
filesystem: Alias for a flash file system. Use flash: for the system board flash device.
/directory-url Path (directory) and name of the empty directories to remove. Separate each
directory name with a space.
Release Modification
12.2(53)SE2 This command was introduced.
Command Description
dir Displays a list of files and directories on the specified file system.
mkdir Creates one or more new directories on the specified file system.

Cisco Catalyst 3750-X Specifications

General

Switching Capacity	160 Gbps
Stacking Bandwidth	64 Gbps
Max Stacking Units	9
Layer Support	Layer 2 and Layer 3
Form Factor	Rack-mountable
DRAM	256 MB
Flash Memory	64 MB
Model	Cisco Catalyst 3750-X Series
Ports	24 or 48 10/100/1000 Ethernet ports
Uplink Interfaces	4 SFP or 2 SFP+
Features	StackWise Plus, EnergyWise
Image	IP Base or IP Services
Operating Temperature	0 to 40°C
Operating Humidity	10 to 85% noncondensing