C-9
Catalyst 3750-X and 3560-X Switch Command Reference
OL-29704-01
Appendix C Catalyst 3750-X and 3560-X Show Platform Commands
show platform frontend-controller
show platform frontend-controller
Use the show platform frontend-controller privileged EXEC command to display counter and status
information for the front-end controller manager and subordinate applications and to display the
hardware and software information for the front-end controller.
show platform frontend-controller {buffer | generic | manager number | subordinate number |
version number}
Syntax Description
Command Modes Privileged EXEC
Command History
Usage Guidelines The subordinate number range is 0 to 2.
You should use this command only when you are working directly with a technical support representative
while troubleshooting a problem. Do not use this command unless a technical support representative asks
you to do so.
buffer Display the last 1024 bytes sent from the manager to the subordinate and the
reverse.
generic Display the generic counters that do not specifically apply to the manager or
subordinate.
manager number Display the counters for the manager and the subordinate specified by
number. See the “Usage Guidelines” section for the number range.
subordinate number Display the subordinate status and the counters for the subordinate specified
by number. See the “Usage Guidelines” section for the number range.
version number Display the hardware and software version information for the subordinate
status specified by number. See the “Usage Guidelines” section for the
number range.
Release Modification
12.2(53)SE2 This command was introduced.
To Next Page
Loading...
Need help?
General
