Cisco Catalyst 3750-X Command Reference

2-108
Catalyst 3750-X and 3560-X Switch Command Reference
OL-29704-01
Chapter 2 Catalyst 3750-X and 3560-X Switch Cisco IOS Commands
clear logging smartlog statistics interface
clear logging smartlog statistics interface
To clear smart logging counters on an interface, use the clear logging smartlog statistics interface
command in privileged EXEC mode.
clear logging smartlog statistics [interface interface-id]
Syntax Description
Defaults No default is defined.
Command Modes Privileged EXEC
Command History
Usage Guidelines You can clear all smart logging statistics by using the clear logging smartlog statistics command, or
you can clear only the statistics on an interface by using the clear logging smartlog statistics interface
interface-id command.
Examples This example shows how to clear all smart logging statistics:
Switch# clear logging smartlog statistics
This example shows how to clear only the smart logging statistics on the specified interface:
Switch# clear logging smartlog statistics interface gi1/0/1
You can verify that the statistics were deleted by entering the show ipc rpc or the show ipc session
privileged EXEC command.
Related Commands
interface interface-id Clears smartlog counters on the specified interface.
Release Modification
12.2(58)SE This command was introduced.
Command Description
show logging smartlog
statistics
Displays the smart logging statistics.

Cisco Catalyst 3750-X Specifications

General

Switching Capacity	160 Gbps
Stacking Bandwidth	64 Gbps
Max Stacking Units	9
Layer Support	Layer 2 and Layer 3
Form Factor	Rack-mountable
DRAM	256 MB
Flash Memory	64 MB
Model	Cisco Catalyst 3750-X Series
Ports	24 or 48 10/100/1000 Ethernet ports
Uplink Interfaces	4 SFP or 2 SFP+
Features	StackWise Plus, EnergyWise
Image	IP Base or IP Services
Operating Temperature	0 to 40°C
Operating Humidity	10 to 85% noncondensing