2-759
Catalyst 3750-X and 3560-X Switch Command Reference
OL-29704-01
Chapter 2 Catalyst 3750-X and 3560-X Switch Cisco IOS Commands
show mls qos input-queue
show mls qos input-queue
Use the show mls qos input-queue user EXEC command to display quality of service (QoS) settings
for the ingress queues.
show mls qos input-queue
Syntax Description This command has no arguments or keywords.
Command Modes User EXEC
Command History
Examples This is an example of output from the show mls qos input-queue command:
Switch> show mls qos input-queue
Queue : 1 2
----------------------------------------------
buffers : 90 10
bandwidth : 4 4
priority : 0 10
threshold1: 100 100
threshold2: 100 100
Related Commands
Release Modification
12.2(53)SE2 This command was introduced.
Command Description
mls qos srr-queue input bandwidth Assigns shaped round robin (SRR) weights to an ingress
queue.
mls qos srr-queue input buffers Allocates the buffers between the ingress queues.
mls qos srr-queue input cos-map Maps assigned class of service (CoS) values to an ingress
queue and assigns CoS values to a queue and to a threshold
ID.
mls qos srr-queue input dscp-map Maps assigned Differentiated Services Code Point (DSCP)
values to an ingress queue and assigns DSCP values to a
queue and to a threshold ID.
mls qos srr-queue input
priority-queue
Configures the ingress priority queue and guarantees
bandwidth.
mls qos srr-queue input threshold Assigns weighted tail-drop (WTD) threshold percentages to
an ingress queue.