Cisco Catalyst 3750-X Command Reference

C-47
Catalyst 3750-X and 3560-X Switch Command Reference
OL-29704-01
Appendix C Catalyst 3750-X and 3560-X Show Platform Commands
show platform vlan
show platform vlan
Use the show platform vlan privileged EXEC command to display platform-dependent VLAN
information.
show platform vlan {misc | mvid | prune | refcount | rpc {receive | transmit}}
Syntax Description
Command Modes Privileged EXEC
Command History
Usage Guidelines You should use this command only when you are working directly with your technical support
representative while troubleshooting a problem. Do not use this command unless your technical support
representative asks you to do so.
misc Display miscellaneous VLAN module information.
mvid Display the mapped VLAN ID (MVID) allocation information.
prune Display the stack or platform-maintained pruning database.
refcount Display the VLAN lock module-wise reference counts.
rpc {receive |
transmit}
Display remote procedure call (RPC) messages. The keywords have these
meanings:
• receive—Display received information.
• transmit—Display sent information.
Release Modification
12.2(53)SE2 This command was introduced.

Cisco Catalyst 3750-X Specifications

General

Switching Capacity	160 Gbps
Stacking Bandwidth	64 Gbps
Max Stacking Units	9
Layer Support	Layer 2 and Layer 3
Form Factor	Rack-mountable
DRAM	256 MB
Flash Memory	64 MB
Model	Cisco Catalyst 3750-X Series
Ports	24 or 48 10/100/1000 Ethernet ports
Uplink Interfaces	4 SFP or 2 SFP+
Features	StackWise Plus, EnergyWise
Image	IP Base or IP Services
Operating Temperature	0 to 40°C
Operating Humidity	10 to 85% noncondensing