2-727
Catalyst 3750-X and 3560-X Switch Command Reference
OL-29704-01
Chapter 2 Catalyst 3750-X and 3560-X Switch Cisco IOS Commands
show mac address-table address
show mac address-table address
Use the show mac address-table address user EXEC command to display MAC address table
information for the specified MAC address.
show mac address-table address mac-address [interface interface-id] [vlan vlan-id]
Syntax Description
Command Modes User EXEC
Command History
Examples This is an example of output from the show mac address-table address command:
Switch# show mac address-table address 0002.4b28.c482
Mac Address Table
------------------------------------------
Vlan Mac Address Type Ports
---- ----------- ---- -----
All 0002.4b28.c482 STATIC CPU
Total Mac Addresses for this criterion: 1
Related Commands
mac-address Specify the 48-bit MAC address; the valid format is H.H.H.
interface interface-id (Optional) Display information for a specific interface. Valid interfaces
include physical ports and port channels.
vlan vlan-id (Optional) Display entries for the specific VLAN only. The range is 1
to 4094.
Release Modification
12.2(53)SE2 This command was introduced.
Command Description
show mac address-table aging-time Displays the aging time in all VLANs or the specified VLAN.
show mac address-table count Displays the number of addresses present in all VLANs or the
specified VLAN.
show mac address-table dynamic Displays dynamic MAC address table entries only.
show mac address-table interface Displays the MAC address table information for the specified
interface.
show mac address-table notification Displays the MAC address notification settings for all
interfaces or the specified interface.
show mac address-table static Displays static MAC address table entries only.
show mac address-table vlan Displays the MAC address table information for the specified
VLAN.