2-777
Catalyst 3750-X and 3560-X Switch Command Reference
OL-29704-01
Chapter 2 Catalyst 3750-X and 3560-X Switch Cisco IOS Commands
show nmsp
show nmsp
Use the show nmsp privileged EXEC command to display the Network Mobility Services Protocol
(NMSP) information for the switch.
show nmsp {attachment suppress interface | capability | notification interval | statistics
{connection | summary} | status | subscription {detail | summary}}
Syntax Description
Command Modes Privileged EXEC
Command History
Examples This is an example of output from the show nmsp attachment suppress interface command:
Switch# show nmsp attachment suppress interface
NMSP Attachment Suppression Interfaces
--------------------------------------
GigabitEthernet1/1
GigabitEthernet1/2
This is an example of output from the show nmsp capability command:
Switch# show nmsp capability
NMSP Switch Capability
------------------------------
Service Subservice
----------- --------------
Attachment Wired Station
Location Subscription
attachment suppress
interface
Display attachment suppress interfaces.
capability Display switch capabilities including the supported services and
subservices.
notification interval Display the notification intervals of the supported services.
statistics {connection |
summary}
Display the NMSP statistics information.
• connection—display the message counters on each connection.
• summary—display the global counters.
status Display information about the NMSP connections.
subscription {detail |
summary}
Display the subscription information on each NMSP connection.
• detail—display all services and subservices subscribed on each
connection.
• summary—display all services subscribed on each connection.
Release Modification
12.2(53)SE2 This command was introduced.