C-26
Catalyst 3750-X and 3560-X Switch Command Reference
OL-29704-01
Appendix C Catalyst 3750-X and 3560-X Show Platform Commands
show platform pm
show platform pm
Use the show platform pm privileged EXEC command to display platform-dependent port-manager
information.
show platform pm {counters | group-masks | idbs {active-idbs | deleted-idbs} | if-numbers |
link-status | platform-block | port-info interface-id | stack-view | vlan {info | line-state}
Syntax Description
Note Though visible in the command-line help strings, the stack-view keyword is not supported on switches
running the LAN base feature set.
Command Modes Privileged EXEC
Command History
Usage Guidelines You should use this command only when you are working directly with your technical support
representative while troubleshooting a problem. Do not use this command unless your technical support
representative asks you to do so.
counters Display module counters information.
group-masks Display EtherChannel group masks information.
idbs {active-idbs |
deleted-idbs}
Display interface data block (IDB) information. The keywords have these
meanings:
• active-idbs—Display active IDB information.
• deleted-idbs—Display deleted and leaked IDB information.
if-numbers Display interface numbers information.
link-status Display local port link status information.
platform-block Display platform port block information.
port-info interface-id Display port administrative and operation fields for the specified interface.
stack-view Display status information for the stack.
This keyword is available only on Catalyst 3750-X switches.
vlan {info | line-state} Display platform VLAN information. The keywords have these meanings:
• info—Display information for active VLANs.
• line-state—Display line-state information.
Release Modification
12.2(53)SE2 This command was introduced.
To Next Page
Loading...
Need help?
General
