2-739
Catalyst 3750-X and 3560-X Switch Command Reference
OL-29704-01
Chapter 2 Catalyst 3750-X and 3560-X Switch Cisco IOS Commands
show mac address-table vlan
show mac address-table vlan
Use the show mac address-table vlan user EXEC command to display the MAC address table
information for the specified VLAN.
show mac address-table vlan vlan-id
Syntax Description
Command Modes User EXEC
Command History
Examples This is an example of output from the show mac address-table vlan 1 command:
Switch> show mac address-table vlan 1
Mac Address Table
------------------------------------------
Vlan Mac Address Type Ports
---- ----------- ---- -----
1 0100.0ccc.cccc STATIC CPU
1 0180.c200.0000 STATIC CPU
1 0100.0ccc.cccd STATIC CPU
1 0180.c200.0001 STATIC CPU
1 0180.c200.0002 STATIC CPU
1 0180.c200.0003 STATIC CPU
1 0180.c200.0005 STATIC CPU
1 0180.c200.0006 STATIC CPU
1 0180.c200.0007 STATIC CPU
Total Mac Addresses for this criterion: 9
Related Commands
vlan-id (Optional) Display addresses for a specific VLAN. The range is 1 to 4094.
Release Modification
12.2(53)SE2 This command was introduced.
Command Description
show mac address-table address Displays MAC address table information for the specified
MAC address.
show mac address-table aging-time Displays the aging time in all VLANs or the specified
VLAN.
show mac address-table count Displays the number of addresses present in all VLANs or
the specified VLAN.
show mac address-table dynamic Displays dynamic MAC address table entries only.
show mac address-table interface Displays the MAC address table information for the
specified interface.
To Next Page
Loading...
Need help?
General
