Name: Cisco Catalyst 3750-X
Brand: Cisco
Rating: 5 (1 reviews)

To Next Page

To Previous Page

2-846

Catalyst 3750-X and 3560-X Switch Command Reference

OL-29704-01

Chapter 2 Catalyst 3750-X and 3560-X Switch Cisco IOS Commands

snmp-server host

Use the snmp-server host global configuration command on the switch stack or on a standalone switch to

specify the recipient (host) of a Simple Network Management Protocol (SNMP) notification operation.

Use the no form of this command to remove the specified host.

snmp-server host host-addr [informs | traps] [version {1 | 2c | 3 {auth | noauth| priv}] [vrf

vrf-instance] {community-string [notification-type]}

no snmp-server host host-addr [informs | traps] [version {1 | 2c | 3 {auth | noauth | priv}] [vrf

vrf-instance] community-string

Syntax Description host-addr Name or Internet address of the host (the targeted recipient).

udp-port port (Optional) Configure the User Datagram Protocol (UDP) port number of the

host to receive the traps. The range is 0 to 65535.

informs | traps (Optional) Send SNMP traps or informs to this host.

version 1 | 2c | 3 (Optional) Version of the SNMP used to send the traps.

These keywords are supported:

1—SNMPv1. This option is not available with informs.

2c—SNMPv2C.

3—SNMPv3. These optional keywords can follow the Version 3 keyword:

• auth (Optional). Enables Message Digest 5 (MD5) and Secure Hash

Algorithm (SHA) packet authentication.

• noauth (Default). The noAuthNoPriv security level. This is the default

if the [auth | noauth | priv] keyword choice is not specified.

• priv (Optional). Enables Data Encryption Standard (DES) packet

encryption (also called privacy).

vrf vrf-instance (Optional) Virtual private network (VPN) routing instance and name for this

host.

community-string Password-like community string sent with the notification operation. Though

you can set this string by using the snmp-server host command, we

recommend that you define this string by using the snmp-server community

global configuration command before using the snmp-server host

command.

Note The @ symbol is used for delimiting the context information. Avoid

using the @ symbol as part of the SNMP community string when

configuring this command.

Other manuals for Cisco Catalyst 3750-X

Questions and Answers:

Need help?

Do you have a question about the Cisco Catalyst 3750-X and is the answer not in the manual?

General