Cisco Catalyst 3750-X

2-785
Catalyst 3750-X and 3560-X Switch Command Reference
OL-29704-01
Chapter 2 Catalyst 3750-X and 3560-X Switch Cisco IOS Commands
show power inline
show power inline
Use the show power inline user EXEC command to display the Power over Ethernet (PoE) status for the
specified PoE port, the specified stack member, or for all PoE ports in the switch stack.
show power inline [interface-id | consumption | module switch-number] [police] [priority]
Syntax Description
Command Modes User EXEC
Command History
Examples This is an example of output from the show power inline command. Table 2-46 describes the output
fields.
Switch> show power inline
Module Available Used Remaining
(Watts) (Watts) (Watts)
------ --------- -------- ---------
1 n/a n/a n/a
2 n/a n/a n/a
3 1440.0 15.4 1424.6
4 720.0 6.3 713.7
Interface Admin Oper Power Device Class Max
(Watts)
--------- ------ ---------- ------- ------------------- ----- ----
Gi3/0/1 auto off 0.0 n/a n/a 30.0
Gi3/0/2 auto off 0.0 n/a n/a 30.0
Gi3/0/3 auto off 0.0 n/a n/a 30.0
Gi3/0/4 auto off 0.0 n/a n/a 30.0
Gi3/0/5 auto off 0.0 n/a n/a 30.0
Gi3/0/6 auto off 0.0 n/a n/a 30.0
Gi3/0/7 auto off 0.0 n/a n/a 30.0
Gi3/0/8 auto off 0.0 n/a n/a 30.0
Gi3/0/9 auto off 0.0 n/a n/a 30.0
Gi3/0/10 auto off 0.0 n/a n/a 30.0
Gi3/0/11 auto off 0.0 n/a n/a 30.0
Gi3/0/12 auto off 0.0 n/a n/a 30.0
<output truncated>
interface-id (Optional) Display PoE-related power management information for the
specified interface.
consumption (Optional) Display the power allocated to devices connected to PoE ports.
module switch-number (Optional) Limit the display to ports on the specified stack member. The
switch number is 1 to 9.
This keyword is supported only on stacking-capable switches.
police (Optional) Display the power policing information about real-time power
consumption.
priority (Optional) Display the power inline port priority for each port.
Release Modification
12.2(53)SE2 This command was introduced.