Cisco Catalyst 3750-X

2-767
Catalyst 3750-X and 3560-X Switch Command Reference
OL-29704-01
Chapter 2 Catalyst 3750-X and 3560-X Switch Cisco IOS Commands
show mls qos queue-set
show mls qos queue-set
Use the show mls qos queue-set user EXEC command to display quality of service (QoS) settings for
the egress queues.
show mls qos queue-set [qset-id]
Syntax Description
Command Modes User EXEC
Command History
Examples This is an example of output from the show mls qos queue-set command:
Switch> show mls qos queue-set
Queueset: 1
Queue : 1 2 3 4
----------------------------------------------
buffers : 25 25 25 25
threshold1: 100 200 100 100
threshold2: 100 200 100 100
reserved : 50 50 50 50
maximum : 400 400 400 400
Queueset: 2
Queue : 1 2 3 4
----------------------------------------------
buffers : 25 25 25 25
threshold1: 100 200 100 100
threshold2: 100 200 100 100
reserved : 50 50 50 50
maximum : 400 400 400 400
Related Commands
qset-id (Optional) ID of the queue-set. Each port belongs to a queue-set, which defines
all the characteristics of the four egress queues per port. The range is 1 to 2.
Release Modification
12.2(53)SE2 This command was introduced.
Command Description
mls qos queue-set output buffers Allocates buffers to the queue-set.
mls qos queue-set output threshold Configures the weighted tail-drop (WTD) thresholds,
guarantees the availability of buffers, and configures the
maximum memory allocation of the queue-set.