Cisco Catalyst 3750-X Command Reference

2-375
Catalyst 3750-X and 3560-X Switch Command Reference
OL-29704-01
Chapter 2 Catalyst 3750-X and 3560-X Switch Cisco IOS Commands
mac address-table notification
mac address-table notification
Use the mac address-table notification global configuration command on the switch stack or on a
standalone switch to enable the MAC address notification feature on the switch or the switch stack. Use
the no form of this command to return to the default setting.
mac address-table notification {change [history-size value | interval value] | mac-move |
threshold [[limit percentage] interval time]}
no mac address-table notification {change [history-size value | interval value] | mac-move |
threshold [[limit percentage] interval time]}
Syntax Description
Defaults By default, the MAC address notification, MAC move, and MAC threshold monitoring are disabled.
The default MAC change trap interval is 1 second.
The default number of entries in the history table is 1.
The default MAC utilization threshold is 50 percent.
The default time between MAC threshold notifications is 120 seconds.
Command Modes Global configuration
Command History
Usage Guidelines The MAC address notification change feature sends Simple Network Management Protocol (SNMP)
traps to the network management system (NMS) whenever a new MAC address is added or an old
address is deleted from the forwarding tables. MAC change notifications are generated only for dynamic
and secure MAC addresses and are not generated for self addresses, multicast addresses, or other static
addresses.
change Enable or disable the MAC notification on the switch.
history-size value (Optional) Configure the maximum number of entries in the MAC
notification history table. The range is 0 to 500 entries. The default is 1.
interval value (Optional) Set the notification trap interval. The switch or the switch stack
sends the notification traps when this amount of time has elapsed. The range
is 0 to 2147483647 seconds. The default is 1 second.
mac-move Enable MAC move notification.
threshold Enable MAC threshold notification.
limit percentage (Optional) Enter the MAC utilization threshold percentage. The range is 1 to
100 percent. The default is 50 percent.
interval time (Optional) Enter the time between MAC threshold notifications. The range is
120 to 1000000 seconds. The default is 120 seconds.
Release Modification
12.2(53)SE2 This command was introduced.

Cisco Catalyst 3750-X Specifications

General

Switching Capacity	160 Gbps
Stacking Bandwidth	64 Gbps
Max Stacking Units	9
Layer Support	Layer 2 and Layer 3
Form Factor	Rack-mountable
DRAM	256 MB
Flash Memory	64 MB
Model	Cisco Catalyst 3750-X Series
Ports	24 or 48 10/100/1000 Ethernet ports
Uplink Interfaces	4 SFP or 2 SFP+
Features	StackWise Plus, EnergyWise
Image	IP Base or IP Services
Operating Temperature	0 to 40°C
Operating Humidity	10 to 85% noncondensing