Cisco Catalyst 3750-X Command Reference

2-163
Catalyst 3750-X and 3560-X Switch Command Reference
OL-29704-01
Chapter 2 Catalyst 3750-X and 3560-X Switch Cisco IOS Commands
device-sensor notify
device-sensor notify
To enable client notifications and accounting events for TLV changes, use the device-sensor notify
command in global configuration mode. To disable client notifications and accounting events for TLV
changes, use the no form of this command.
device-sensor notify all-changes | new-tlvs
no device-sensor notify all-changes | new-tlvs
Syntax Description
Command Default Client notifications and accounting events are generated only for new TLVs.
Command Modes Global configuration (config)
Command History
Usage Guidelines By default, for each supported peer protocol, client notifications and accounting events will only be
generated when an incoming packet includes a TLV that has not been previously received in the context
of a given session.
To enable client notifications and accounting events for all TLV changes, where either a new TLV has
been received or a previously received TLV has been received with a different value, use the
device-sensor notify all-changes command.
To return to the default behavior, use the device-sensor notify new-tlvs or the default device-sensor
notify command.
Examples The following example shows how to enable client notifications and accounting events for all TLV
change:
Switch> enable
Switch# configure terminal
Switch(config)# device-sensor notify all-changes
Related Commands
all-changes Enables client notifications and accounting events for all TLV changes.
new-tlvs Enables client notifications and accounting events for only new TLV changes.
Release Modification
15.0(1)SE1 This command was introduced.
Command Description
debug device-sensor Enables debugging for Device Sensor.
device-sensor
accounting
Adds the Device Sensor protocol data to accounting records and generates
additional accounting events when new sensor data is detected.

Cisco Catalyst 3750-X Specifications

General

Switching Capacity	160 Gbps
Stacking Bandwidth	64 Gbps
Max Stacking Units	9
Layer Support	Layer 2 and Layer 3
Form Factor	Rack-mountable
DRAM	256 MB
Flash Memory	64 MB
Model	Cisco Catalyst 3750-X Series
Ports	24 or 48 10/100/1000 Ethernet ports
Uplink Interfaces	4 SFP or 2 SFP+
Features	StackWise Plus, EnergyWise
Image	IP Base or IP Services
Operating Temperature	0 to 40°C
Operating Humidity	10 to 85% noncondensing