Cisco Catalyst 3750-X

C-6
Catalyst 3750-X and 3560-X Switch Command Reference
OL-29704-01
Appendix C Catalyst 3750-X and 3560-X Show Platform Commands
show platform etherchannel
show platform etherchannel
Use the show platform etherchannel privileged EXEC command to display platform-dependent
EtherChannel information.
show platform etherchannel {flags | time-stamps}
Syntax Description
Command Modes Privileged EXEC
Command History
Usage Guidelines You should use this command only when you are working directly with a technical support representative
while troubleshooting a problem. Do not use this command unless a technical support representative asks
you to do so.
flags Display EtherChannel port flags.
time-stamps Display EtherChannel time stamps.
Release Modification
12.2(53)SE2 This command was introduced.