Cisco Catalyst 3750-X

C-36
Catalyst 3750-X and 3560-X Switch Command Reference
OL-29704-01
Appendix C Catalyst 3750-X and 3560-X Show Platform Commands
show platform snmp counters
show platform snmp counters
Use the show platform snmp counters privileged EXEC command to display platform-dependent
Simple Network Management Protocol (SNMP) counter information.
show platform snmp counters
Syntax Description There are no arguments or keywords.
Command Modes Privileged EXEC
Command History
Usage Guidelines You should use this command only when you are working directly with your technical support
representative while troubleshooting a problem. Do not use this command unless your technical support
representative asks you to do so.
Release Modification
12.2(53)SE2 This command was introduced.