C-11
Catalyst 3750-X and 3560-X Switch Command Reference
OL-29704-01
Appendix C Catalyst 3750-X and 3560-X Show Platform Commands
show platform ip multicast
show platform ip multicast
Use the show platform ip multicast privileged EXEC command to display platform-dependent IP
multicast tables and other information.
show platform ip multicast {acl-full-info | counters | groups | hardware [detail] | interfaces |
locks | mdfs-routes | mroute-retry | retry | trace}
Note This command is not supported on switches running the LAN base feature set.
Syntax Description
Command Modes Privileged EXEC
Command History
Usage Guidelines You should use this command only when you are working directly with a technical support representative
while troubleshooting a problem. Do not use this command unless a technical support representative asks
you to do so.
acl-full-info Display IP multicast routing access-control list (ACL) information, in
particular the number of outgoing VLANs for which router ACLs at the
output cannot be applied in hardware.
counters Display IP multicast counters and statistics.
groups Display IP multicast routes per group.
hardware [detail] Display IP multicast routes loaded into hardware. The optional detail
keyword is used to show port members in the destination index and route
index.
interfaces Display IP multicast interfaces.
locks Display IP multicast destination-index locks.
mdfs-routes Display multicast distributed fast switching (MDFS) IP multicast routes.
mroute-retry Display the IP multicast route retry queue.
retry Display the IP multicast routes in the retry queue.
trace Display the IP multicast trace buffer.
Release Modification
12.2(53)SE2 This command was introduced.
To Next Page
Loading...
Need help?
General
