Cisco Catalyst 3750-X Command Reference

2-180
Catalyst 3750-X and 3560-X Switch Command Reference
OL-29704-01
Chapter 2 Catalyst 3750-X and 3560-X Switch Cisco IOS Commands
dot1x credentials (global configuration)
dot1x credentials (global configuration)
Use the dot1x credentials global configuration command to configure a profile on a supplicant switch.
dot1x credentials profile
no dot1x credentials profile
Syntax Description
Defaults No profile is configured for the switch.
Command Modes Global configuration
Command History
Usage Guidelines You must have another switch set up as the authenticator for this switch to be the supplicant.
Examples This example shows how to configure a switch as a supplicant:
Switch(config)# dot1x credentials profile
You can verify your settings by entering the show running-config privileged EXEC command.
Related Commands
profile Specify a profile for the supplicant switch.
Release Modification
12.2(53)SE2 This command was introduced.
Command Description
cisp enable Enables Client Information Signalling Protocol (CISP).
show cisp Displays CISP information for a specified interface.

Cisco Catalyst 3750-X Specifications

General

Switching Capacity	160 Gbps
Stacking Bandwidth	64 Gbps
Max Stacking Units	9
Layer Support	Layer 2 and Layer 3
Form Factor	Rack-mountable
DRAM	256 MB
Flash Memory	64 MB
Model	Cisco Catalyst 3750-X Series
Ports	24 or 48 10/100/1000 Ethernet ports
Uplink Interfaces	4 SFP or 2 SFP+
Features	StackWise Plus, EnergyWise
Image	IP Base or IP Services
Operating Temperature	0 to 40°C
Operating Humidity	10 to 85% noncondensing