Cisco Catalyst 3750-X Command Reference

2-580
Catalyst 3750-X and 3560-X Switch Command Reference
OL-29704-01
Chapter 2 Catalyst 3750-X and 3560-X Switch Cisco IOS Commands
show class-map
show class-map
Use the show class-map user EXEC command to display quality of service (QoS) class maps, which
define the match criteria to classify traffic.
show class-map [class-map-name]
Syntax Description
Command Modes User EXEC
Command History
Examples This is an example of output from the show class-map command:
Switch> show class-map
Class Map match-all videowizard_10-10-10-10 (id 2)
Match access-group name videowizard_10-10-10-10
Class Map match-any class-default (id 0)
Match any
Class Map match-all dscp5 (id 3)
Match ip dscp 5
Related Commands
class-map-name (Optional) Display the contents of the specified class map.
Release Modification
12.2(53)SE2 This command was introduced.
Command Description
class-map Creates a class map to be used for matching packets to the class
whose name you specify.
match (class-map configuration) Defines the match criteria to classify traffic.

Cisco Catalyst 3750-X Specifications

General

Switching Capacity	160 Gbps
Stacking Bandwidth	64 Gbps
Max Stacking Units	9
Layer Support	Layer 2 and Layer 3
Form Factor	Rack-mountable
DRAM	256 MB
Flash Memory	64 MB
Model	Cisco Catalyst 3750-X Series
Ports	24 or 48 10/100/1000 Ethernet ports
Uplink Interfaces	4 SFP or 2 SFP+
Features	StackWise Plus, EnergyWise
Image	IP Base or IP Services
Operating Temperature	0 to 40°C
Operating Humidity	10 to 85% noncondensing