Cisco Catalyst 3750-X Command Reference

C-23
Catalyst 3750-X and 3560-X Switch Command Reference
OL-29704-01
Appendix C Catalyst 3750-X and 3560-X Show Platform Commands
show platform messaging
show platform messaging
Use the show platform messaging privileged EXEC command to display platform-dependent
application and performance message information.
show platform messaging {application [incoming | outgoing | summary] | hiperf
[class-number]}
Syntax Description
Command Modes Privileged EXEC
Command History
Usage Guidelines You should use this command only when you are working directly with a technical support representative
while troubleshooting a problem. Do not use this command unless a technical support representative asks
you to do so.
application [incoming |
outgoing | summary]
Display application message information. The keywords have these
meanings:
• incoming—(Optional) Display only information about incoming
application messaging requests.
• outgoing—(Optional) Display only information about incoming
application messaging requests.
• summary—(Optional) Display summary information about all
application messaging requests.
hiperf [class-number] Display outgoing high-performance message information. Specify the
class-number option to display information about high-performance
messages for this class number. The range is 0 to 36.
Release Modification
12.2(53)SE2 This command was introduced.

Cisco Catalyst 3750-X Specifications

General

Switching Capacity	160 Gbps
Stacking Bandwidth	64 Gbps
Max Stacking Units	9
Layer Support	Layer 2 and Layer 3
Form Factor	Rack-mountable
DRAM	256 MB
Flash Memory	64 MB
Model	Cisco Catalyst 3750-X Series
Ports	24 or 48 10/100/1000 Ethernet ports
Uplink Interfaces	4 SFP or 2 SFP+
Features	StackWise Plus, EnergyWise
Image	IP Base or IP Services
Operating Temperature	0 to 40°C
Operating Humidity	10 to 85% noncondensing