Cisco Catalyst 3750-X Command Reference

2-452
Catalyst 3750-X and 3560-X Switch Command Reference
OL-29704-01
Chapter 2 Catalyst 3750-X and 3560-X Switch Cisco IOS Commands
no mab logging verbose
no mab logging verbose
Use the no mab logging verbose global configuration command on the switch stack or on a standalone
switch to filter detailed information from MAC authentication bypass (MAB) system messages.
no mab logging verbose
Defaults All details are displayed in the system messages.
Syntax Description This command has no arguments or keywords.
Command Modes Global configuration
Command History
Usage Guidelines This command filters details, such as anticipated success, from MAC authentication bypass (MAB)
system messages.
Examples To filter verbose MAB system messages:
Switch(config)# no mab logging verbose
You can verify your settings by entering the show running-config privileged EXEC command.
Related Commands
Release Modification
12.2(55)SE This command was introduced.
Command Description
no authentication
logging verbose
Filters details from authentication system messages.
no dot1x logging
verbose
Filters details from 802.1x system messages.
no mab logging
verbose
Filters details from MAC authentication bypass (MAB) system messages.

Cisco Catalyst 3750-X Specifications

General

Switching Capacity	160 Gbps
Stacking Bandwidth	64 Gbps
Max Stacking Units	9
Layer Support	Layer 2 and Layer 3
Form Factor	Rack-mountable
DRAM	256 MB
Flash Memory	64 MB
Model	Cisco Catalyst 3750-X Series
Ports	24 or 48 10/100/1000 Ethernet ports
Uplink Interfaces	4 SFP or 2 SFP+
Features	StackWise Plus, EnergyWise
Image	IP Base or IP Services
Operating Temperature	0 to 40°C
Operating Humidity	10 to 85% noncondensing