Cisco Catalyst 3750-X Command Reference

2-622
Catalyst 3750-X and 3560-X Switch Command Reference
OL-29704-01
Chapter 2 Catalyst 3750-X and 3560-X Switch Cisco IOS Commands
show eap
show eap
Use the show eap privileged EXEC command to display Extensible Authentication Protocol (EAP)
registration and session information for the switch or for the specified port.
show eap {{registrations [method [name] | transport [name]]} | {sessions [credentials name
[interface interface-id] | interface interface-id | method name | transport name]}}
[credentials name | interface interface-id | transport name]
Syntax Description
Command Modes Privileged EXEC
Command History
Usage Guidelines When you use the show eap registrations privileged EXEC command with these keywords, the
command output shows this information:
• None—All the lower levels used by EAP and the registered EAP methods.
• method name keyword—The specified method registrations.
• transport name keyword—The specific lower-level registrations.
registrations Display EAP registration information.
method name (Optional) Display EAP method registration information.
transport name (Optional) Display EAP transport registration information.
sessions Display EAP session information.
credentials name (Optional) Display EAP method registration information.
interface interface-id (Optional) Display the EAP information for the specified port (including
type, stack member (stacking-capable switches only) module, and port
number).
Release Modification
12.2(53)SE2 This command was introduced.

Cisco Catalyst 3750-X Specifications

General

Switching Capacity	160 Gbps
Stacking Bandwidth	64 Gbps
Max Stacking Units	9
Layer Support	Layer 2 and Layer 3
Form Factor	Rack-mountable
DRAM	256 MB
Flash Memory	64 MB
Model	Cisco Catalyst 3750-X Series
Ports	24 or 48 10/100/1000 Ethernet ports
Uplink Interfaces	4 SFP or 2 SFP+
Features	StackWise Plus, EnergyWise
Image	IP Base or IP Services
Operating Temperature	0 to 40°C
Operating Humidity	10 to 85% noncondensing