Cisco Catalyst 3750-X Command Reference

2-103
Catalyst 3750-X and 3560-X Switch Command Reference
OL-29704-01
Chapter 2 Catalyst 3750-X and 3560-X Switch Cisco IOS Commands
clear ipc
clear ipc
Use the clear ipc privileged EXEC command on the switch stack or on a standalone switch to clear
Interprocess Communications Protocol (IPC) statistics.
clear ipc {queue-statistics | statistics}
Note This command is not supported on switches running the LAN base feature set.
Syntax Description
Defaults No default is defined.
Command Modes Privileged EXEC
Command History
Usage Guidelines You can clear all statistics by using the clear ipc statistics command, or you can clear only the queue
statistics by using the clear ipc queue-statistics command.
Examples This example shows how to clear all statistics:
Switch# clear ipc statistics
This example shows how to clear only the queue statistics:
Switch# clear ipc queue-statistics
You can verify that the statistics were deleted by entering the show ipc rpc or the show ipc session
privileged EXEC command.
Related Commands
queue-statistics Clear the IPC queue statistics.
statistics Clear the IPC statistics.
Release Modification
12.2(53)SE2 This command was introduced.
Command Description
show ipc {rpc | session} Displays the IPC multicast routing statistics.

Cisco Catalyst 3750-X Specifications

General

Switching Capacity	160 Gbps
Stacking Bandwidth	64 Gbps
Max Stacking Units	9
Layer Support	Layer 2 and Layer 3
Form Factor	Rack-mountable
DRAM	256 MB
Flash Memory	64 MB
Model	Cisco Catalyst 3750-X Series
Ports	24 or 48 10/100/1000 Ethernet ports
Uplink Interfaces	4 SFP or 2 SFP+
Features	StackWise Plus, EnergyWise
Image	IP Base or IP Services
Operating Temperature	0 to 40°C
Operating Humidity	10 to 85% noncondensing