2-725
Catalyst 3750-X and 3560-X Switch Command Reference
OL-29704-01
Chapter 2 Catalyst 3750-X and 3560-X Switch Cisco IOS Commands
\show mac address-table
\show mac address-table
Use the show mac address-table user EXEC command to display a specific MAC address table static
and dynamic entry or the MAC address table static and dynamic entries on a specific interface or VLAN.
show mac address-table
Syntax Description This command has no arguments or keywords.
Command Modes User EXEC
Command History
Examples This is an example of output from the show mac address-table command:
Switch> show mac address-table
Mac Address Table
------------------------------------------
Vlan Mac Address Type Ports
---- ----------- ---- -----
All 0000.0000.0001 STATIC CPU
All 0000.0000.0002 STATIC CPU
All 0000.0000.0003 STATIC CPU
All 0000.0000.0009 STATIC CPU
All 0000.0000.0012 STATIC CPU
All 0180.c200.000b STATIC CPU
All 0180.c200.000c STATIC CPU
All 0180.c200.000d STATIC CPU
All 0180.c200.000e STATIC CPU
All 0180.c200.000f STATIC CPU
All 0180.c200.0010 STATIC CPU
1 0030.9441.6327 DYNAMIC Gi6/0/4
Total Mac Addresses for this criterion: 12
Related Commands
Release Modification
12.2(53)SE2 This command was introduced.
Command Description
clear mac address-table dynamic Deletes from the MAC address table a specific dynamic
address, all dynamic addresses on a particular interface, or all
dynamic addresses on a particular VLAN.
show mac address-table aging-time Displays the aging time in all VLANs or the specified VLAN.
show mac address-table count Displays the number of addresses present in all VLANs or the
specified VLAN.
show mac address-table dynamic Displays dynamic MAC address table entries only.
show mac address-table interface Displays the MAC address table information for the specified
interface.