Cisco Catalyst 3750-X Command Reference

2-212
Catalyst 3750-X and 3560-X Switch Command Reference
OL-29704-01
Chapter 2 Catalyst 3750-X and 3560-X Switch Cisco IOS Commands
epm access-control open
epm access-control open
Use the epm access-control open global configuration command on the switch stack or on a standalone
switch to configure an open directive for ports that do not have an access control list (ACL) configured.
Use the no form of this command to disable the open directive.
epm access-control open
no epm access-control open
Syntax Description This command has no keywords or arguments.
Defaults The default directive applies.
Command Modes Global configuration
Command History
Usage Guidelines Use this command to configure an open directive that allows hosts without an authorization policy to
access ports configured with a static ACL. If you do not configure this command, the port applies the
policies of the configured ACL to the traffic. If no static ACL is configured on a port, both the default
and open directives allow access to the port.
Examples This example shows how to configure an open directive.
Switch(config)# epm access-control open
You can verify your settings by entering the show running-config privileged EXEC command.
Related Commands
Release Modification
12.2(55)SE2 This command was introduced.
Command Description
show running-config Displays the operating configuration.

Cisco Catalyst 3750-X Specifications

General

Switching Capacity	160 Gbps
Stacking Bandwidth	64 Gbps
Max Stacking Units	9
Layer Support	Layer 2 and Layer 3
Form Factor	Rack-mountable
DRAM	256 MB
Flash Memory	64 MB
Model	Cisco Catalyst 3750-X Series
Ports	24 or 48 10/100/1000 Ethernet ports
Uplink Interfaces	4 SFP or 2 SFP+
Features	StackWise Plus, EnergyWise
Image	IP Base or IP Services
Operating Temperature	0 to 40°C
Operating Humidity	10 to 85% noncondensing