Cisco Catalyst 3750-X Command Reference

2-578
Catalyst 3750-X and 3560-X Switch Command Reference
OL-29704-01
Chapter 2 Catalyst 3750-X and 3560-X Switch Cisco IOS Commands
show cdp forward
show cdp forward
To display the CDP forwarding table, use the show cdp forward user EXEC command.
show cdp forward [entry | forward | interface interface-id | neighbor | traffic]
Note This command is not supported on switches running the LAN base feature set.
Syntax Description
Command Modes Use EXEC
Command History
Usage Guidelines The show cdp forward command output shows the number of CDP packets forwarded on each
ingress-port- to-egress-port mapping and the statistics for forwarded and dropped packets.
Examples
Switch# show cdp forward
Ingress Egress # packets # packets
Port Port forwarded dropped
-------------------------------------------------------------
Gi2/0/2 Gi2/0/13 0 0
Related Commands
entry (Optional) Displays information about a specific neighbor entry.
forward (Optional) Displays the CDP forwarding information.
interface interface-id (Optional) Displays the CDP interface status and configuration.
neighbor (Optional) Displays the CDP neighbor entries.
traffic (Optional) Displays the CDP statistics.
Release Modification
12.2(53)SE2 This command was introduced.
Command Description
cdp forward Configures the ingress and egress switch ports for CDP
traffic.

Cisco Catalyst 3750-X Specifications

General

Switching Capacity	160 Gbps
Stacking Bandwidth	64 Gbps
Max Stacking Units	9
Layer Support	Layer 2 and Layer 3
Form Factor	Rack-mountable
DRAM	256 MB
Flash Memory	64 MB
Model	Cisco Catalyst 3750-X Series
Ports	24 or 48 10/100/1000 Ethernet ports
Uplink Interfaces	4 SFP or 2 SFP+
Features	StackWise Plus, EnergyWise
Image	IP Base or IP Services
Operating Temperature	0 to 40°C
Operating Humidity	10 to 85% noncondensing