Cisco Catalyst 3750-X

C-17
Catalyst 3750-X and 3560-X Switch Command Reference
OL-29704-01
Appendix C Catalyst 3750-X and 3560-X Show Platform Commands
show platform ipc trace
show platform ipc trace
Use the show platform ipc trace privileged EXEC command to display platform-dependent
Interprocess Communication (IPC) Protocol trace log information.
show platform ipc trace
Note This command is supported only on Catalyst 3750-X switches.
Syntax Description There are no arguments or keywords.
Command Modes Privileged EXEC
Command History
Usage Guidelines You should use this command only when you are working directly with a technical support representative
while troubleshooting a problem. Do not use this command unless a technical support representative asks
you to do so.
Release Modification
12.2(53)SE2 This command was introduced.