Cisco Catalyst 3750-X Command Reference

B-7
Catalyst 3750-X and 3560-X Switch Command Reference
OL-29704-01
Appendix B Catalyst 3750-X and 3560-X Switch Debug Commands
debug cisp
debug cisp
Use the debug cisp global configuration command to enable debugging message exchanges and events
on a Client Information Signalling Protocol (CISP)-enabled interface.Use the no form of this command
to disable debugging.
debug cisp [all | errors | events | packets | sync]
no debug cisp [initialization | interface-configuration | rpc]
Syntax Description
Defaults Debugging is disabled.
Command Modes Privileged EXEC
Command History
Related Commands
all Display all CISP debug messages.
errors Display CISP debug messages.
events Display CISP event debug messages.
packets Display CISP packet debug messages.
sync Display CISP operational synchronization debug messages.
Release Modification
12.2(53)SE2 This command was introduced.
Command Description
cisp enable Enables Client Information Signalling Protocol (CISP)
dot1x credentials
(global configuration)
profile
Configures a profile on a supplicant switch.
show cisp Displays CISP information for a specified interface.

Cisco Catalyst 3750-X Specifications

General

Switching Capacity	160 Gbps
Stacking Bandwidth	64 Gbps
Max Stacking Units	9
Layer Support	Layer 2 and Layer 3
Form Factor	Rack-mountable
DRAM	256 MB
Flash Memory	64 MB
Model	Cisco Catalyst 3750-X Series
Ports	24 or 48 10/100/1000 Ethernet ports
Uplink Interfaces	4 SFP or 2 SFP+
Features	StackWise Plus, EnergyWise
Image	IP Base or IP Services
Operating Temperature	0 to 40°C
Operating Humidity	10 to 85% noncondensing