Cisco Catalyst 3750-X Command Reference

2-75
Catalyst 3750-X and 3560-X Switch Command Reference
OL-29704-01
Chapter 2 Catalyst 3750-X and 3560-X Switch Cisco IOS Commands
boot config-file
boot config-file
Use the boot config-file global configuration command on a standalone switch to specify the filename
that Cisco IOS uses to read and write a nonvolatile copy of the system configuration. Use the no form
of this command to return to the default setting.
boot config-file flash:/file-url
no boot config-file
Syntax Description
Defaults The default configuration file is flash:config.text.
Command Modes Global configuration
Command History
Usage Guidelines This command works properly only from a standalone switch in a stack.
Filenames and directory names are case sensitive.
This command changes the setting of the CONFIG_FILE environment variable. For more information,
see Appendix A “Catalyst 3750-X and 3560-X Switch Boot Loader Commands.”
Related Commands
flash:/file-url The path (directory) and name of the configuration file.
Release Modification
12.2(53)SE2 This command was introduced.
Command Description
show boot Displays the settings of the boot environment variables.

Cisco Catalyst 3750-X Specifications

General

Switching Capacity	160 Gbps
Stacking Bandwidth	64 Gbps
Max Stacking Units	9
Layer Support	Layer 2 and Layer 3
Form Factor	Rack-mountable
DRAM	256 MB
Flash Memory	64 MB
Model	Cisco Catalyst 3750-X Series
Ports	24 or 48 10/100/1000 Ethernet ports
Uplink Interfaces	4 SFP or 2 SFP+
Features	StackWise Plus, EnergyWise
Image	IP Base or IP Services
Operating Temperature	0 to 40°C
Operating Humidity	10 to 85% noncondensing