Cisco Catalyst 3750-X Command Reference

2-637
Catalyst 3750-X and 3560-X Switch Command Reference
OL-29704-01
Chapter 2 Catalyst 3750-X and 3560-X Switch Cisco IOS Commands
show etherchannel
show etherchannel
Use the show etherchannel user EXEC command to display EtherChannel information for a channel.
show etherchannel [channel-group-number {detail | port | port-channel | protocol | summary}]
{detail | load-balance | port | port-channel | protocol | summary}
Syntax Description
Command Modes User EXEC
Command History
Usage Guidelines If you do not specify a channel-group, all channel groups are displayed.
In the output, the Passive port list field is displayed only for Layer 3 port channels. This field means that
the physical port, which is still not up, is configured to be in the channel group (and indirectly is in the
only port channel in the channel group).
Note Layer 3 port channels are not supported when the switch is running the LAN base feature set.
channel-group-number (Optional) Number of the channel group. The range is 1 to 48.
detail Display detailed EtherChannel information.
load-balance Display the load-balance or frame-distribution scheme among ports in the
port channel.
port Display EtherChannel port information.
port-channel Display port-channel information.
protocol Display the protocol that is being used in the EtherChannel.
summary Display a one-line summary per channel-group.
Release Modification
12.2(53)SE2 This command was introduced.

Cisco Catalyst 3750-X Specifications

General

Switching Capacity	160 Gbps
Stacking Bandwidth	64 Gbps
Max Stacking Units	9
Layer Support	Layer 2 and Layer 3
Form Factor	Rack-mountable
DRAM	256 MB
Flash Memory	64 MB
Model	Cisco Catalyst 3750-X Series
Ports	24 or 48 10/100/1000 Ethernet ports
Uplink Interfaces	4 SFP or 2 SFP+
Features	StackWise Plus, EnergyWise
Image	IP Base or IP Services
Operating Temperature	0 to 40°C
Operating Humidity	10 to 85% noncondensing