Cisco Catalyst 3750-X Command Reference

2-25
Catalyst 3750-X and 3560-X Switch Command Reference
OL-29704-01
Chapter 2 Catalyst 3750-X and 3560-X Switch Cisco IOS Commands
authentication command bounce-port ignore
authentication command bounce-port ignore
Use the authentication command bounce-port ignore global configuration command on the switch
stack or on a standalone switch to allow the switch to ignore a command to temporarily disable a port.
Use the no form of this command to return to the default status.
authentication command bounce-port ignore
no authentication command bounce-port ignore
Syntax Description This command has no arguments or keywords.
Defaults The switch accepts a RADIUS Change of Authorization (CoA) bounce port command.
Command Modes Global configuration
Command History
Usage Guidelines The CoA bounce port command causes a link flap, which triggers a DHCP renegotiation from the host.
This is useful when a VLAN change occurs and the endpoint is a device such as a printer, that has no
supplicant to detect the change. Use this command to configure the switch to ignore the bounce port
command.
Examples This example shows how to instruct the switch to ignore a CoA bounce port command:
Switch(config)# authentication command bounce-port ignore
Related Commands
Release Modification
12.2(53)SE2 This command was introduced.
Command Description
authentication command
disable-port ignore
Configures the switch to ignore a CoA disable port command.

Cisco Catalyst 3750-X Specifications

General

Switching Capacity	160 Gbps
Stacking Bandwidth	64 Gbps
Max Stacking Units	9
Layer Support	Layer 2 and Layer 3
Form Factor	Rack-mountable
DRAM	256 MB
Flash Memory	64 MB
Model	Cisco Catalyst 3750-X Series
Ports	24 or 48 10/100/1000 Ethernet ports
Uplink Interfaces	4 SFP or 2 SFP+
Features	StackWise Plus, EnergyWise
Image	IP Base or IP Services
Operating Temperature	0 to 40°C
Operating Humidity	10 to 85% noncondensing